bundle-config(1)



BUNDLE-CONFIG(1)                                              BUNDLE-CONFIG(1)

NAME
       bundle-config - Set bundler configuration options

SYNOPSIS
       bundle config [list|get|set|unset] [name [value]]

DESCRIPTION
       This  command  allows you to interact with Bundler's configuration sys-
       tem.

       Bundler loads configuration settings in this order:

       1.  Local config (app/.bundle/config)

       2.  Environmental variables (ENV)

       3.  Global config (~/.bundle/config)

       4.  Bundler default config

       Executing bundle config list with will print a list of all bundler con-
       figuration  for  the  current  bundle, and where that configuration was
       set.

       Executing bundle config get <name> will print the value of that config-
       uration setting, and where it was set.

       Executing  bundle config set <name> <value> will set that configuration
       to the value specified for all bundles executed as  the  current  user.
       The  configuration  will be stored in ~/.bundle/config. If name already
       is set, name will be overridden and user will be warned.

       Executing bundle config set --global <name> <value> works the  same  as
       above.

       Executing  bundle  config set --local <name> <value> will set that con-
       figuration to the local application. The configuration will  be  stored
       in app/.bundle/config.

       Executing  bundle  config unset <name> will delete the configuration in
       both local and global sources.

       Executing bundle config unset --global <name> will delete the  configu-
       ration only from the user configuration.

       Executing  bundle  config  unset --local <name> <value> will delete the
       configuration only from the local application.

       Executing bundle with the BUNDLE_IGNORE_CONFIG environment variable set
       will cause it to ignore all configuration.

       Executing bundle config set disable_multisource true upgrades the warn-
       ing about the Gemfile containing multiple primary sources to an  error.
       Executing bundle config unset disable_multisource downgrades this error
       to a warning.

REMEMBERING OPTIONS
       Flags passed to bundle install or the Bundler runtime, such  as  --path
       foo  or --without production, are remembered between commands and saved
       to your local application's configuration (normally, ./.bundle/config).

       However, this will be changed in bundler 3, so it's better not to  rely
       on  this  behavior. If these options must be remembered, it's better to
       set them using bundle config (e.g., bundle config set path foo).

       The options that can be configured are:

       bin    Creates a directory (defaults to ~/bin) and place  any  executa-
              bles from the gem there. These executables run in Bundler's con-
              text. If used, you might add this  directory  to  your  environ-
              ment's  PATH variable. For instance, if the rails gem comes with
              a rails executable, this flag will create a bin/rails executable
              that ensures that all referred dependencies will be resolved us-
              ing the bundled gems.

       deployment
              In deployment mode, Bundler will 'roll-out' the bundle for  pro-
              duction use. Please check carefully if you want to have this op-
              tion enabled in development or test environments.

       path   The location to install the specified gems to. This defaults  to
              Rubygems'  setting.  Bundler shares this location with Rubygems,
              gem install ... will have gem installed there,  too.  Therefore,
              gems  installed  without  a  --path  ... setting will show up by
              calling gem list. Accordingly, gems installed to other locations
              will not get listed.

       without
              A space-separated list of groups referencing gems to skip during
              installation.

       with   A space-separated list of groups  referencing  gems  to  include
              during installation.

BUILD OPTIONS
       You  can use bundle config to give Bundler the flags to pass to the gem
       installer every time bundler tries to install a particular gem.

       A very common example, the mysql gem, requires Snow  Leopard  users  to
       pass  configuration  flags  to gem install to specify where to find the
       mysql_config executable.

           gem install mysql -- --with-mysql-config=/usr/local/mysql/bin/mysql_config

       Since the specific location of that executable can change from  machine
       to machine, you can specify these flags on a per-machine basis.

           bundle config set build.mysql --with-mysql-config=/usr/local/mysql/bin/mysql_config

       After  running  this  command,  every time bundler needs to install the
       mysql gem, it will pass along the flags you specified.

CONFIGURATION KEYS
       Configuration keys in bundler have two forms: the  canonical  form  and
       the environment variable form.

       For  instance,  passing  the  --without  flag to bundle install(1) bun-
       dle-install.1.html prevents  Bundler  from  installing  certain  groups
       specified  in  the Gemfile(5). Bundler persists this value in app/.bun-
       dle/config so that calls to Bundler.setup do not try to find gems  from
       the  Gemfile that you didn't install. Additionally, subsequent calls to
       bundle install(1) bundle-install.1.html remember this setting and  skip
       those groups.

       The  canonical  form of this configuration is "without". To convert the
       canonical form to the environment variable  form,  capitalize  it,  and
       prepend  BUNDLE_.  The  environment  variable form of "without" is BUN-
       DLE_WITHOUT.

       Any periods in the configuration keys must be replaced with two  under-
       scores when setting it via environment variables. The configuration key
       local.rack becomes the environment variable BUNDLE_LOCAL__RACK.

LIST OF AVAILABLE KEYS
       The following is a list of all configuration keys  and  their  purpose.
       You  can  learn  more  about  their operation in bundle install(1) bun-
       dle-install.1.html.

       o   allow_bundler_dependency_conflicts     (BUNDLE_ALLOW_BUNDLER_DEPEN-
           DENCY_CONFLICTS):  Allow  resolving to specifications that have de-
           pendencies on  bundler  that  are  incompatible  with  the  running
           Bundler version.

       o   allow_deployment_source_credential_changes    (BUNDLE_ALLOW_DEPLOY-
           MENT_SOURCE_CREDENTIAL_CHANGES): When  in  deployment  mode,  allow
           changing    the    credentials    to    a    gem's    source.   Ex:
           https://some.host.com/gems/path/     ->     https://user_name:pass-
           word@some.host.com/gems/path

       o   allow_offline_install (BUNDLE_ALLOW_OFFLINE_INSTALL): Allow Bundler
           to use cached data when installing without network access.

       o   auto_clean_without_path (BUNDLE_AUTO_CLEAN_WITHOUT_PATH): Automati-
           cally  run  bundle clean after installing when an explicit path has
           not been set and Bundler is not installing into the system gems.

       o   auto_install (BUNDLE_AUTO_INSTALL): Automatically  run  bundle  in-
           stall when gems are missing.

       o   bin  (BUNDLE_BIN):  Install  executables from gems in the bundle to
           the specified directory. Defaults to false.

       o   cache_all (BUNDLE_CACHE_ALL): Cache all gems,  including  path  and
           git gems.

       o   cache_all_platforms  (BUNDLE_CACHE_ALL_PLATFORMS):  Cache  gems for
           all platforms.

       o   cache_path (BUNDLE_CACHE_PATH): The  directory  that  bundler  will
           place  cached gems in when running bundle package, and that bundler
           will look in when installing gems. Defaults to vendor/cache.

       o   clean (BUNDLE_CLEAN): Whether Bundler should run bundle clean auto-
           matically after bundle install.

       o   console  (BUNDLE_CONSOLE):  The console that bundle console starts.
           Defaults to irb.

       o   default_install_uses_path       (BUNDLE_DEFAULT_INSTALL_USES_PATH):
           Whether  a  bundle  install without an explicit --path argument de-
           faults to installing gems in .bundle.

       o   deployment (BUNDLE_DEPLOYMENT): Disallow changes  to  the  Gemfile.
           When  the Gemfile is changed and the lockfile has not been updated,
           running Bundler commands will be blocked.

       o   disable_checksum_validation   (BUNDLE_DISABLE_CHECKSUM_VALIDATION):
           Allow  installing  gems even if they do not match the checksum pro-
           vided by RubyGems.

       o   disable_exec_load (BUNDLE_DISABLE_EXEC_LOAD): Stop Bundler from us-
           ing load to launch an executable in-process in bundle exec.

       o   disable_local_branch_check (BUNDLE_DISABLE_LOCAL_BRANCH_CHECK): Al-
           low Bundler to use a local git override without a branch  specified
           in the Gemfile.

       o   disable_multisource  (BUNDLE_DISABLE_MULTISOURCE):  When  set, Gem-
           files containing multiple sources will produce  errors  instead  of
           warnings. Use bundle config unset disable_multisource to unset.

       o   disable_platform_warnings  (BUNDLE_DISABLE_PLATFORM_WARNINGS): Dis-
           able warnings during bundle install when a dependency is unused  on
           the current platform.

       o   disable_shared_gems (BUNDLE_DISABLE_SHARED_GEMS): Stop Bundler from
           accessing gems installed to RubyGems' normal location.

       o   disable_version_check (BUNDLE_DISABLE_VERSION_CHECK): Stop  Bundler
           from   checking   if  a  newer  Bundler  version  is  available  on
           rubygems.org.

       o   force_ruby_platform (BUNDLE_FORCE_RUBY_PLATFORM): Ignore  the  cur-
           rent  machine's  platform and install only ruby platform gems. As a
           result, gems with native extensions will be compiled from source.

       o   frozen (BUNDLE_FROZEN): Disallow changes to the Gemfile.  When  the
           Gemfile  is  changed and the lockfile has not been updated, running
           Bundler commands will be blocked. Defaults to true  when  --deploy-
           ment is used.

       o   gem.push_key  (BUNDLE_GEM__PUSH_KEY):  Sets the --key parameter for
           gem push when using the rake release command with  a  private  gem-
           stash server.

       o   gemfile  (BUNDLE_GEMFILE): The name of the file that bundler should
           use as the Gemfile. This location of this file also sets  the  root
           of the project, which is used to resolve relative paths in the Gem-
           file, among other things. By default, bundler will search  up  from
           the current working directory until it finds a Gemfile.

       o   global_gem_cache  (BUNDLE_GLOBAL_GEM_CACHE): Whether Bundler should
           cache all gems globally, rather than locally to the installing Ruby
           installation.

       o   ignore_messages (BUNDLE_IGNORE_MESSAGES): When set, no post install
           messages will be printed. To silence a single gem, use dot notation
           like ignore_messages.httparty true.

       o   init_gems_rb  (BUNDLE_INIT_GEMS_RB) Generate a gems.rb instead of a
           Gemfile when running bundle init.

       o   jobs (BUNDLE_JOBS): The number of gems Bundler can install in  par-
           allel. Defaults to 1.

       o   no_install  (BUNDLE_NO_INSTALL): Whether bundle package should skip
           installing gems.

       o   no_prune (BUNDLE_NO_PRUNE): Whether Bundler should  leave  outdated
           gems unpruned when caching.

       o   only_update_to_newer_versions     (BUNDLE_ONLY_UPDATE_TO_NEWER_VER-
           SIONS): During bundle update, only resolve to newer versions of the
           gems in the lockfile.

       o   path  (BUNDLE_PATH):  The  location  on disk where all gems in your
           bundle will be located regardless of $GEM_HOME or $GEM_PATH values.
           Bundle  gems not found in this location will be installed by bundle
           install. Defaults to Gem.dir. When --deployment is  used,  defaults
           to vendor/bundle.

       o   path.system  (BUNDLE_PATH__SYSTEM):  Whether  Bundler  will install
           gems into the default system path (Gem.dir).

       o   path_relative_to_cwd  (BUNDLE_PATH_RELATIVE_TO_CWD)  Makes   --path
           relative to the CWD instead of the Gemfile.

       o   plugins (BUNDLE_PLUGINS): Enable Bundler's experimental plugin sys-
           tem.

       o   prefer_patch (BUNDLE_PREFER_PATCH): Prefer updating  only  to  next
           patch  version during updates. Makes bundle update calls equivalent
           to bundler update --patch.

       o   print_only_version_number (BUNDLE_PRINT_ONLY_VERSION_NUMBER)  Print
           only version number from bundler --version.

       o   redirect  (BUNDLE_REDIRECT):  The  number  of redirects allowed for
           network requests. Defaults to 5.

       o   retry (BUNDLE_RETRY): The number of times to retry  failed  network
           requests. Defaults to 3.

       o   setup_makes_kernel_gem_public   (BUNDLE_SETUP_MAKES_KERNEL_GEM_PUB-
           LIC): Have Bundler.setup make the Kernel#gem  method  public,  even
           though RubyGems declares it as private.

       o   shebang  (BUNDLE_SHEBANG):  The program name that should be invoked
           for generated binstubs. Defaults to the ruby install name  used  to
           generate the binstub.

       o   silence_deprecations (BUNDLE_SILENCE_DEPRECATIONS): Whether Bundler
           should silence deprecation  warnings  for  behavior  that  will  be
           changed in the next major version.

       o   silence_root_warning   (BUNDLE_SILENCE_ROOT_WARNING):  Silence  the
           warning Bundler prints when installing gems as root.

       o   skip_default_git_sources (BUNDLE_SKIP_DEFAULT_GIT_SOURCES): Whether
           Bundler should skip adding default git source shortcuts to the Gem-
           file DSL.

       o   specific_platform (BUNDLE_SPECIFIC_PLATFORM): Allow bundler to  re-
           solve  for  the specific running platform and store it in the lock-
           file, instead of only using a generic platform. A specific platform
           is  the exact platform triple reported by Gem::Platform.local, such
           as x86_64-darwin-16  or  universal-java-1.8.  On  the  other  hand,
           generic  platforms  are those such as ruby, mswin, or java. In this
           example, x86_64-darwin-16 would map to ruby and  universal-java-1.8
           to java.

       o   ssl_ca_cert  (BUNDLE_SSL_CA_CERT): Path to a designated CA certifi-
           cate file or folder containing multiple  certificates  for  trusted
           CAs in PEM format.

       o   ssl_client_cert (BUNDLE_SSL_CLIENT_CERT): Path to a designated file
           containing a X.509 client certificate and key in PEM format.

       o   ssl_verify_mode (BUNDLE_SSL_VERIFY_MODE): The SSL verification mode
           Bundler uses when making HTTPS requests. Defaults to verify peer.

       o   suppress_install_using_messages (BUNDLE_SUPPRESS_INSTALL_USING_MES-
           SAGES): Avoid printing Using ... messages during installation  when
           the version of a gem has not changed.

       o   system_bindir  (BUNDLE_SYSTEM_BINDIR):  The location where RubyGems
           installs binstubs. Defaults to Gem.bindir.

       o   timeout (BUNDLE_TIMEOUT): The seconds allowed before timing out for
           network requests. Defaults to 10.

       o   unlock_source_unlocks_spec     (BUNDLE_UNLOCK_SOURCE_UNLOCKS_SPEC):
           Whether running bundle update --source NAME unlocks a gem with  the
           given name. Defaults to true.

       o   update_requires_all_flag  (BUNDLE_UPDATE_REQUIRES_ALL_FLAG) Require
           passing --all to bundle update when everything should  be  updated,
           and disallow passing no options to bundle update.

       o   user_agent  (BUNDLE_USER_AGENT):  The  custom  user  agent fragment
           Bundler includes in API requests.

       o   with (BUNDLE_WITH): A :-separated list of groups whose gems bundler
           should install.

       o   without  (BUNDLE_WITHOUT):  A :-separated list of groups whose gems
           bundler should not install.

       In general, you should set these settings per-application by using  the
       applicable  flag to the bundle install(1) bundle-install.1.html or bun-
       dle package(1) bundle-package.1.html command.

       You can set them globally either via environment  variables  or  bundle
       config,  whichever is preferable for your setup. If you use both, envi-
       ronment variables will take preference over global settings.

LOCAL GIT REPOS
       Bundler also allows you to work against a git  repository  locally  in-
       stead of using the remote version. This can be achieved by setting up a
       local override:

           bundle config set local.GEM_NAME /path/to/local/git/repository

       For example, in order to use a local Rack repository, a developer could
       call:

           bundle config set local.rack ~/Work/git/rack

       Now  instead of checking out the remote git repository, the local over-
       ride will be used. Similar to a path source, every time the  local  git
       repository  change, changes will be automatically picked up by Bundler.
       This means a commit in the local git repo will update the  revision  in
       the Gemfile.lock to the local git repo revision. This requires the same
       attention as git submodules. Before pushing to the remote, you need  to
       ensure the local override was pushed, otherwise you may point to a com-
       mit that only exists in your local machine. You'll also need to CGI es-
       cape your usernames and passwords as well.

       Bundler  does many checks to ensure a developer won't work with invalid
       references. Particularly, we force a developer to specify a  branch  in
       the  Gemfile  in  order to use this feature. If the branch specified in
       the Gemfile and the current branch in the local git repository  do  not
       match,  Bundler  will  abort.  This  ensures that a developer is always
       working against the correct branches, and prevents  accidental  locking
       to a different branch.

       Finally,  Bundler  also  ensures  that the current revision in the Gem-
       file.lock exists in the local git repository. By  doing  this,  Bundler
       forces you to fetch the latest changes in the remotes.

MIRRORS OF GEM SOURCES
       Bundler  supports  overriding gem sources with mirrors. This allows you
       to configure rubygems.org as the gem source in your Gemfile while still
       using your mirror to fetch gems.

           bundle config set mirror.SOURCE_URL MIRROR_URL

       For  example,  to  use a mirror of rubygems.org hosted at rubygems-mir-
       ror.org:

           bundle config set mirror.http://rubygems.org http://rubygems-mirror.org

       Each mirror also provides a fallback timeout  setting.  If  the  mirror
       does  not  respond within the fallback timeout, Bundler will try to use
       the original server instead of the mirror.

           bundle config set mirror.SOURCE_URL.fallback_timeout TIMEOUT

       For example, to fall back to rubygems.org after 3 seconds:

           bundle config set mirror.https://rubygems.org.fallback_timeout 3

       The default fallback timeout is 0.1 seconds, but the setting  can  cur-
       rently only accept whole seconds (for example, 1, 15, or 30).

CREDENTIALS FOR GEM SOURCES
       Bundler  allows  you to configure credentials for any gem source, which
       allows you to avoid putting secrets into your Gemfile.

           bundle config set SOURCE_HOSTNAME USERNAME:PASSWORD

       For example, to save the credentials of  user  claudette  for  the  gem
       source at gems.longerous.com, you would run:

           bundle config set gems.longerous.com claudette:s00pers3krit

       Or you can set the credentials as an environment variable like this:

           export BUNDLE_GEMS__LONGEROUS__COM="claudette:s00pers3krit"

       For gems with a git source with HTTP(S) URL you can specify credentials
       like so:

           bundle config set https://github.com/bundler/bundler.git username:password

       Or you can set the credentials as an environment variable like so:

           export BUNDLE_GITHUB__COM=username:password

       This is especially useful for private repositories  on  hosts  such  as
       Github, where you can use personal OAuth tokens:

           export BUNDLE_GITHUB__COM=abcd0123generatedtoken:x-oauth-basic

CONFIGURE BUNDLER DIRECTORIES
       Bundler's  home,  config,  cache  and plugin directories are able to be
       configured through environment  variables.  The  default  location  for
       Bundler's  home  directory  is ~/.bundle, which all directories inherit
       from by default. The following outlines the available environment vari-
       ables and their default values

           BUNDLE_USER_HOME : $HOME/.bundle
           BUNDLE_USER_CACHE : $BUNDLE_USER_HOME/cache
           BUNDLE_USER_CONFIG : $BUNDLE_USER_HOME/config
           BUNDLE_USER_PLUGIN : $BUNDLE_USER_HOME/plugin

                                 January 2020                 BUNDLE-CONFIG(1)

Man(1) output converted with man2html
list of all man pages