deb-src-control(5)



deb-src-control(5)                dpkg suite                deb-src-control(5)

NAME
       deb-src-control - Debian source packages' master control file format

SYNOPSIS
       debian/control

DESCRIPTION
       Each  Debian source package contains the master <<control>> file, which
       contains at least 2 paragraphs, separated by a blank line.   The  first
       paragraph  lists  all  information about the source package in general,
       while each following paragraph describes exactly  one  binary  package.
       Each  paragraph  consists  of at least one field. A field starts with a
       fieldname, such as Package or Section (case insensitive), followed by a
       colon, the body of the field and a newline.  Multi-line fields are also
       allowed, but each supplementary line, without a fieldname, should start
       with  at  least  one  space.  The  content  of the multi-line fields is
       generally joined to a single line by the tools (except in the  case  of
       the  Description field, see below). To insert empty lines into a multi-
       line field, insert a dot after the space.  Lines starting  with  a  '#'
       are treated as comments.

SOURCE FIELDS
       Source: source-package-name (required)
              The  value  of this field is the name of the source package, and
              should  match  the  name  of   the   source   package   in   the
              debian/changelog  file.  A  package  name  must  consist only of
              lowercase letters (a-z), digits (0-9), plus (+)  and  minus  (-)
              signs,  and  periods  (.).  Package  names  must be at least two
              characters long and must start  with  a  lowercase  alphanumeric
              character (a-z0-9).

       Maintainer: fullname-email (recommended)
              Should  be  in  the format <<Joe Bloggs <jbloggs@foo.com>>>, and
              references the person who currently maintains  the  package,  as
              opposed to the author of the software or the original packager.

       Uploaders: fullname-email
              Lists all the names and email addresses of co-maintainers of the
              package, in the same format as the Maintainer  field.   Multiple
              co-maintainers should be separated by a comma.

       Standards-Version: version-string
              This  documents  the  most  recent  version  of the distribution
              policy standards this package complies with.

       Description short-description
        long-description
              The format for the source package description is a  short  brief
              summary  on  the  first line (after the Description field).  The
              following lines should  be  used  as  a  longer,  more  detailed
              description.  Each line of the long description must be preceded
              by a space, and blank lines in the long description must contain
              a single '.' following the preceding space.

       Homepage: url
              The upstream project home page URL.

       Bugs: url
              The url of the bug tracking system for this package. The current
              used      format      is      bts-type://bts-address,       like
              debbugs://bugs.debian.org. This field is usually not needed.

       Rules-Requires-Root: no|binary-targets|impl-keywords
              This  field  is  used  to indicate whether the debian/rules file
              requires (fake)root privileges to run some of its  targets,  and
              if so when.

              no     The binary targets will not require (fake)root at all.

              binary-targets
                     The  binary  targets must always be run under (fake)root.
                     This value is the default  when  the  field  is  omitted;
                     adding  the  field  with an explicit binary-targets while
                     not strictly needed, marks it as having been analyzed for
                     this requirement.

              impl-keywords
                     This  is  a space-separated list of keywords which define
                     when (fake)root is required.

                     Keywords consist of namespace/cases.  The namespace  part
                     cannot  contain "/" or whitespace.  The cases part cannot
                     contain whitespace.  Furthermore, both parts must consist
                     entirely of printable ASCII characters.

                     Each  tool/package  will  define  a namespace named after
                     itself and provide a number of cases where (fake)root  is
                     required.   (See  "Implementation  provided  keywords" in
                     rootless-builds.txt).

                     When the field is set to one of  the  impl-keywords,  the
                     builder  will  expose  an interface that is used to run a
                     command  under  (fake)root.   (See  "Gain  Root  API"  in
                     rootless-builds.txt.)

       Testsuite: name-list
       Testsuite-Triggers: package-list
              These  fields  are  described in the dsc(5) manual page, as they
              are     generated     from     information     inferred     from
              debian/tests/control  or  copied literally to the source control
              file.

       Vcs-Arch: url
       Vcs-Bzr: url
       Vcs-Cvs: url
       Vcs-Darcs: url
       Vcs-Git: url
       Vcs-Hg: url
       Vcs-Mtn: url
       Vcs-Svn: url
              The url  of  the  Version  Control  System  repository  used  to
              maintain   this  package.  Currently  supported  are  Arch,  Bzr
              (Bazaar), Cvs, Darcs, Git, Hg (Mercurial),  Mtn  (Monotone)  and
              Svn  (Subversion).  Usually  this  field  points  to  the latest
              version of the package, such as the main branch or the trunk.

       Vcs-Browser: url
              The url of a webinterface to browse the Version  Control  System
              repository.

       Origin: name
              The  name  of the distribution this package is originating from.
              This field is usually not needed.

       Section: section
              This is a general field that gives the package a category  based
              on  the  software  that  it  installs.  Some common sections are
              utils, net, mail, text, x11, etc.

       Priority: priority
              Sets the importance of this package in relation to the system as
              a  whole.   Common  priorities are required, standard, optional,
              extra, etc.

              The Section and Priority fields usually have a  defined  set  of
              accepted values based on the specific distribution policy.

       Build-Depends: package-list
              A  list  of packages that need to be installed and configured to
              be able to build from source package.  These  dependencies  need
              to  be  satisfied when building binary architecture dependent or
              independent  packages  and   source   packages.    Including   a
              dependency  in this field does not have the exact same effect as
              including it in both Build-Depends-Arch and Build-Depends-Indep,
              because  the dependency also needs to be satisfied when building
              the source package.

       Build-Depends-Arch: package-list
              Same as Build-Depends, but they are only  needed  when  building
              the  architecture dependent packages. The Build-Depends are also
              installed in this case.  This  field  is  supported  since  dpkg
              1.16.4;   in   order   to   build   with  older  dpkg  versions,
              Build-Depends should be used instead.

       Build-Depends-Indep: package-list
              Same as Build-Depends, but they are only  needed  when  building
              the  architecture  independent  packages.  The Build-Depends are
              also installed in this case.

       Build-Conflicts: package-list
              A list of packages that should not be installed when the package
              is  built,  for  example  because  they interfere with the build
              system used.  Including a dependency in this list has  the  same
              effect   as   including  it  in  both  Build-Conflicts-Arch  and
              Build-Conflicts-Indep, with the additional effect of being  used
              for source-only builds.

       Build-Conflicts-Arch: package-list
              Same as Build-Conflicts, but only when building the architecture
              dependent packages. This field is supported since  dpkg  1.16.4;
              in  order  to  build  with  older dpkg versions, Build-Conflicts
              should be used instead.

       Build-Conflicts-Indep: package-list
              Same as Build-Conflicts, but only when building the architecture
              independent packages.

       The    syntax    of    the    Build-Depends,   Build-Depends-Arch   and
       Build-Depends-Indep fields is a list of groups of alternative packages.
       Each  group is a list of packages separated by vertical bar (or "pipe")
       symbols, '|'.  The groups are separated by commas ',', and can end with
       a trailing comma that will be eliminated when generating the fields for
       deb-control(5) (since dpkg 1.10.14).  Commas are to be read  as  "AND",
       and  pipes as "OR", with pipes binding more tightly.  Each package name
       is optionally followed by an architecture qualifier  appended  after  a
       colon  ':',  optionally  followed  by a version number specification in
       parentheses '('  and  ')',  an  architecture  specification  in  square
       brackets  '['  and  ']', and a restriction formula consisting of one or
       more lists of profile names in angle brackets '<' and '>'.

       The   syntax   of   the   Build-Conflicts,   Build-Conflicts-Arch   and
       Build-Conflicts-Indep  fields  is  a  list  of  comma-separated package
       names, where the comma is read as an "AND", and where the list can  end
       with  a  trailing  comma  that  will  be eliminated when generating the
       fields for deb-control(5) (since dpkg 1.10.14).  Specifying alternative
       packages  using  a  "pipe"  is  not  supported.   Each  package name is
       optionally followed by a version number specification  in  parentheses,
       an  architecture  specification  in  square brackets, and a restriction
       formula consisting of one or more  lists  of  profile  names  in  angle
       brackets.

       An  architecture  qualifier name can be a real Debian architecture name
       (since dpkg 1.16.5), any (since dpkg  1.16.2)  or  native  (since  dpkg
       1.16.5).   If  omitted,  the  default  for  Build-Depends fields is the
       current host architecture, the default for  Build-Conflicts  fields  is
       any.    A  real  Debian  architecture  name  will  match  exactly  that
       architecture for that package name, any will match any architecture for
       that  package  name  if the package is marked with Multi-Arch: allowed,
       and native will match the current build architecture if the package  is
       not marked with Multi-Arch: foreign.

       A version number may start with a '>>', in which case any later version
       will match, and may specify  or  omit  the  Debian  packaging  revision
       (separated  by  a hyphen).  Accepted version relationships are '>>' for
       greater than, '<<' for less than, '>=' for greater than  or  equal  to,
       '<=' for less than or equal to, and '=' for equal to.

       An  architecture  specification  consists  of  one or more architecture
       names, separated by whitespace. Exclamation marks may be  prepended  to
       each of the names, meaning "NOT".

       A  restriction  formula  consists  of  one  or  more restriction lists,
       separated by whitespace. Each restriction list  is  enclosed  in  angle
       brackets.  Items  in  the  restriction  list  are  build profile names,
       separated by whitespace and can be prefixed with an  exclamation  mark,
       meaning  "NOT".   A restriction formula represents a disjunctive normal
       form expression.

       Note that dependencies on packages in the build-essential  set  can  be
       omitted  and that declaring build conflicts against them is impossible.
       A list of these packages is in the build-essential package.

BINARY FIELDS
       Note that the Priority, Section and Homepage fields can also  be  in  a
       binary paragraph to override the global value from the source package.

       Package: binary-package-name (required)
              This  field  is  used  to name the binary package name. The same
              restrictions as to a source package name apply.

       Package-Type: deb|udeb|type
              This field defines the type of the package.  udeb is  for  size-
              constrained  packages  used by the debian installer.  deb is the
              default value, it is assumed if the field is absent.  More types
              might be added in the future.

       Architecture: arch|all|any (required)
              The  architecture  specifies  on  which  type  of  hardware this
              package runs. For packages that run on  all  architectures,  use
              the  any  value. For packages that are architecture independent,
              such as shell and Perl scripts or  documentation,  use  the  all
              value.   To   restrict   the   packages  to  a  certain  set  of
              architectures, specify the architecture names,  separated  by  a
              space.  It's also possible to put architecture wildcards in that
              list (see dpkg-architecture(1) for more information about them).

       Build-Profiles: restriction-formula
              This field  specifies  the  conditions  for  which  this  binary
              package  does or does not build.  To express that condition, the
              same restriction formula syntax from the Build-Depends field  is
              used.

              If  a binary package paragraph does not contain this field, then
              it implicitly means that  it  builds  with  all  build  profiles
              (including none at all).

              In  other words, if a binary package paragraph is annotated with
              a non-empty Build-Profiles field, then this  binary  package  is
              generated  if  and  only  if  the  condition  expressed  by  the
              conjunctive normal form expression evaluates to true.

       Essential: yes|no
       Build-Essential: yes|no
       Multi-Arch: same|foreign|allowed|no
       Tag: tag-list
       Description: short-description (recommended)
              These fields are described in the deb-control(5) manual page, as
              they  are  copied  literally  to  the control file of the binary
              package.

       Depends: package-list
       Pre-Depends: package-list
       Recommends: package-list
       Suggests: package-list
       Breaks: package-list
       Enhances: package-list
       Replaces: package-list
       Conflicts: package-list
       Provides: package-list
       Built-Using: package-list
              These fields declare relationships between  packages.  They  are
              discussed  in the deb-control(5) manpage.  When these fields are
              found in debian/control they can also end with a trailing  comma
              (since  dpkg  1.10.14),  have  architecture  specifications  and
              restriction formulas which will all get reduced when  generating
              the fields for deb-control(5).

       Subarchitecture: value
       Kernel-Version: value
       Installer-Menu-Item: value
              These  fields  are used by the debian-installer in udebs and are
              usually              not              needed.                See
              /usr/share/doc/debian-installer/devel/modules.txt    from    the
              debian-installer package for more details about them.

USER-DEFINED FIELDS
       It is allowed to add additional  user-defined  fields  to  the  control
       file.  The tools will ignore these fields. If you want the fields to be
       copied over to the output files, such as the binary packages, you  need
       to  use  a  custom  naming  scheme:  the fields should start with an X,
       followed by zero or more of the letters SBC and a hyphen.

       S      The field will appear in the source package  control  file,  see
              dsc(5).

       B      The field will appear in the control file in the binary package,
              see deb-control(5).

       C      The field will appear in the upload control (.changes) file, see
              deb-changes(5).

       Note  that the X[SBC]- prefixes are stripped when the fields are copied
       over to the  output  files.  A  field  XC-Approved-By  will  appear  as
       Approved-By  in  the  changes file and will not appear in the binary or
       source package control files.

       Take into account that these user-defined  fields  will  be  using  the
       global  namespace, which might at some point in the future collide with
       officially recognized fields. To avoid such potential situation you can
       prefix those fields with Private-, such as XB-Private-New-Field.

EXAMPLE
       # Comment
       Source: dpkg
       Section: admin
       Priority: required
       Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
       # this field is copied to the binary and source packages
       XBS-Upstream-Release-Status: stable
       Homepage: https://wiki.debian.org/Teams/Dpkg
       Vcs-Browser: https://git.dpkg.org/cgit/dpkg/dpkg.git
       Vcs-Git: https://git.dpkg.org/git/dpkg/dpkg.git
       Standards-Version: 3.7.3
       Build-Depends: pkg-config, debhelper (>= 4.1.81),
        libselinux1-dev (>= 1.28-4) [!linux-any]

       Package: dpkg-dev
       Section: utils
       Priority: optional
       Architecture: all
       # this is a custom field in the binary package
       XB-Mentoring-Contact: Raphael Hertzog <hertzog@debian.org>
       Depends: dpkg (>= 1.14.6), perl5, perl-modules, cpio (>= 2.4.2-2),
        bzip2, lzma, patch (>= 2.2-1), make, binutils, libtimedate-perl
       Recommends: gcc | c-compiler, build-essential
       Suggests: gnupg, debian-keyring
       Conflicts: dpkg-cross (<< 2.0.0), devscripts (<< 2.10.26)
       Replaces: manpages-pl (<= 20051117-1)
       Description: Debian package development tools
        This package provides the development tools (including dpkg-source)
        required to unpack, build and upload Debian source packages.
        .
        Most Debian source packages will require additional tools to build;
        for example, most packages need make and the C compiler gcc.

SEE ALSO
       deb-control(5), deb-version(7), dpkg-source(1)

1.19.7                            2019-06-03                deb-src-control(5)

Man(1) output converted with man2html
list of all man pages