sane-nec(5)



sane-nec(5)              SANE Scanner Access Now Easy              sane-nec(5)

NAME
       sane-nec - SANE backend for NEC scanners

DESCRIPTION
       The  sane-nec library implements a SANE (Scanner Access Now Easy) back-
       end that provides access to NEC SCSI scanners.  This backend should  be
       considered alpha-quality software!  In the current state it is known to
       work with PC-IN500/4C scanners. Another MultiReader scanner  series  is
       not  supported.  PC-IN  500/4C and MultiReader scanner are only sold in
       Japan.(except Multi Reader PetiScan.)

       For other scanners, it may or may not work.

       The backend has the following known problems:
              - ColorLineart mode is not supported.
              - device name is fixed to /dev/scanner

       At present, the following scanners are known to work with this backend.
              Vendor Product id
              ------ -----------
              NEC    PC-IN500/4C

FILES
       @CONFIGDIR@/nec.conf
              The backend configuration file.

       @LIBDIR@/libsane-nec.a
              The static library implementing this backend.

       @LIBDIR@/libsane-nec.so
              The shared library implementing this backend (present on systems
              that support dynamic loading).

ENVIRONMENT
       SANE_DEBUG_NEC
              If the library was compiled with debug support enabled, this en-
              vironment variable controls the debug level  for  this  backend.
              E.g.,  a  value  of 128 requests all debug output to be printed.
              Smaller levels reduce verbosity.

SEE ALSO
       sane(7), sane-scsi(5)

AUTHORS
       Kazuya Fukuda

@PACKAGEVERSION@                  14 Jul 2008                      sane-nec(5)

Man(1) output converted with man2html
list of all man pages