sane-umax1220u(5)



sane-umax1220u(5)        SANE Scanner Access Now Easy        sane-umax1220u(5)

NAME
       sane-umax1220u  -  SANE  backend  for  the UMAX Astra 1220U and similar
       scanners

DESCRIPTION
       The sane-umax1220 library implements a SANE (Scanner Access  Now  Easy)
       backend for the the UMAX Astra 1220U and similar scanners.

       For    more    information    on    this    backend,    please    visit
       http://umax1220u-sane.sourceforge.net/.

UMAX ASTRA 1600U/2000U/2100U SUPPORT
       This backend is also able to drive the  UMAX  Astra  1600U/2000U/2100U.
       The  2100U is confirmed to work. For the other scanners no reports have
       been received yet. Please contact us and tell us if your scanner  works
       (sane-devel@lists.alioth.debian.org).

CONFIGURATION
       Usually,  no  manual configuration is necessary. The configuration file
       for this backend resides in @CONFIGDIR@/umax1220u.conf.

       Its contents is a list of device names that correspond  to  UMAX  Astra
       scanners.   Empty lines and lines starting with a hash mark (#) are ig-
       nored. A sample configuration file is shown below:

        #usb vendor product
        usb 0x1606 0x0010
        # Device list for non-linux systems
        /dev/scanner
        /dev/usb/scanner0

       See sane-usb(5) for information on how to set the access permissions on
       the usb device files.

FILES
       The backend configuration file:
              @CONFIGDIR@/umax1220u.conf

       The static library implementing this backend:
              @LIBDIR@/libsane-umax1220u.a

       The shared library implementing this backend:
              @LIBDIR@/libsane-umax1220u.so  (present  on systems that support
              dynamic loading)

ENVIRONMENT
       SANE_DEBUG_UMAX1220U
              If the library was compiled with debug support enabled, this en-
              vironment  variable  controls  the debug level for this backend.
              E.g., a value of 128 requests all debug output  to  be  printed.
              Smaller levels reduce verbosity:

              SANE_DEBUG_UMAX1220U values

              Number  Remark

               1       print failures
               2       print information
               3       print high-level function calls
               4       print high-level function checkpoints
               9       print mid-level function calls
               10      print mid-level function checkpoints
               80      print protocol-level function entry
               90      print protocol-level function exit

       Example:
              export SANE_DEBUG_UMAX1220U=10

KNOWN BUGS
       600 dpi scanning may fail for large image sizes.

       If  you  keep getting I/O errors, try cycling the power on your scanner
       to reset it.

       There is no way to cancel a scan, since the  driver  ignores  sane_can-
       cel().

       If  you  try scanning an image which is too small, you will get I/O er-
       rors. Be sure to adjust the scan area before doing a scan, since by de-
       fault, the scan area is zero.

SEE ALSO
       sane(7), sane-usb(5)

       (Old) homepage:
              http://umax1220u-sane.sourceforge.net/

AUTHOR
       Marcio Luis Teixeira <marciot@users.sourceforge.net>

EMAIL-CONTACT
       sane-devel@lists.alioth.debian.org

REPORTING BUGS
       This  backend  isn't actively maintained. Nevertheless, bug reports and
       comments should be sent to the sane-devel mailing list.  When reporting
       bugs,  please  run  the backend with SANE_DEBUG_UMAX1220U set to 10 and
       attach a copy of the log messages.

@PACKAGEVERSION@                  14 Jul 2008                sane-umax1220u(5)

Man(1) output converted with man2html
list of all man pages