SNMPv2-MIB(7)



SNMPv2-MIB(7)                         MIB                        SNMPv2-MIB(7)

NAME
       SNMPv2-MIB - The Erlang/OTP MIB module for SNMP entities

DESCRIPTION
       SNMPv2-MIB DEFINITIONS ::= BEGIN

       IMPORTS
           MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
           TimeTicks, Counter32, snmpModules, mib-2
               FROM SNMPv2-SMI
           DisplayString, TestAndIncr, TimeStamp

               FROM SNMPv2-TC
           MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
               FROM SNMPv2-CONF;

       snmpMIB MODULE-IDENTITY
           LAST-UPDATED "200210160000Z"
           ORGANIZATION "IETF SNMPv3 Working Group"
           CONTACT-INFO
                   "WG-EMail:   snmpv3@lists.tislabs.com
                    Subscribe:  snmpv3-request@lists.tislabs.com

                    Co-Chair:   Russ Mundy
                                Network Associates Laboratories
                    postal:     15204 Omega Drive, Suite 300
                                Rockville, MD 20850-4601
                                USA
                    EMail:      mundy@tislabs.com
                    phone:      +1 301 947-7107

                    Co-Chair:   David Harrington
                                Enterasys Networks
                    postal:     35 Industrial Way
                                P. O. Box 5005
                                Rochester, NH 03866-5005
                                USA
                    EMail:      dbh@enterasys.com
                    phone:      +1 603 337-2614

                    Editor:     Randy Presuhn
                                BMC Software, Inc.
                    postal:     2141 North First Street
                                San Jose, CA 95131
                                USA
                    EMail:      randy_presuhn@bmc.com
                    phone:      +1 408 546-1006"
           DESCRIPTION
                   "The MIB module for SNMP entities.

                    Copyright (C) The Internet Society (2002). This
                    version of this MIB module is part of RFC 3418;
                    see the RFC itself for full legal notices.
                   "
           REVISION      "200210160000Z"
           DESCRIPTION
                   "This revision of this MIB module was published as
                    RFC 3418."
           REVISION      "199511090000Z"
           DESCRIPTION
                   "This revision of this MIB module was published as
                    RFC 1907."
           REVISION      "199304010000Z"
           DESCRIPTION
                   "The initial revision of this MIB module was published
                   as RFC 1450."
           ::= { snmpModules 1 }

       snmpMIBObjects OBJECT IDENTIFIER ::= { snmpMIB 1 }

       --  ::= { snmpMIBObjects 1 }        this OID is obsolete
       --  ::= { snmpMIBObjects 2 }        this OID is obsolete
       --  ::= { snmpMIBObjects 3 }        this OID is obsolete

       -- the System group
       --
       -- a collection of objects common to all managed systems.

       system   OBJECT IDENTIFIER ::= { mib-2 1 }

       sysDescr OBJECT-TYPE
           SYNTAX      DisplayString (SIZE (0..255))
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
                   "A textual description of the entity.  This value should
                   include the full name and version identification of
                   the system's hardware type, software operating-system,
                   and networking software."
           ::= { system 1 }

       sysObjectID OBJECT-TYPE
           SYNTAX      OBJECT IDENTIFIER
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
                   "The vendor's authoritative identification of the
                   network management subsystem contained in the entity.
                   This value is allocated within the SMI enterprises
                   subtree (1.3.6.1.4.1) and provides an easy and
                   unambiguous means for determining `what kind of box' is
                   being managed.  For example, if vendor `Flintstones,
                   Inc.' was assigned the subtree 1.3.6.1.4.1.424242,
                   it could assign the identifier 1.3.6.1.4.1.424242.1.1
                   to its `Fred Router'."
           ::= { system 2 }

       sysUpTime OBJECT-TYPE
           SYNTAX      TimeTicks
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
                   "The time (in hundredths of a second) since the
                   network management portion of the system was last
                   re-initialized."
           ::= { system 3 }

       sysContact OBJECT-TYPE
           SYNTAX      DisplayString (SIZE (0..255))
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
                   "The textual identification of the contact person for
                   this managed node, together with information on how
                   to contact this person.  If no contact information is
                   known, the value is the zero-length string."
           ::= { system 4 }

       sysName OBJECT-TYPE
           SYNTAX      DisplayString (SIZE (0..255))
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
                   "An administratively-assigned name for this managed
                   node.  By convention, this is the node's fully-qualified
                   domain name.  If the name is unknown, the value is
                   the zero-length string."
           ::= { system 5 }

       sysLocation OBJECT-TYPE
           SYNTAX      DisplayString (SIZE (0..255))
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
                   "The physical location of this node (e.g., 'telephone
                   closet, 3rd floor').  If the location is unknown, the
                   value is the zero-length string."
           ::= { system 6 }

       sysServices OBJECT-TYPE
           SYNTAX      INTEGER (0..127)
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
                   "A value which indicates the set of services that this
                   entity may potentially offer.  The value is a sum.

                   This sum initially takes the value zero. Then, for
                   each layer, L, in the range 1 through 7, that this node
                   performs transactions for, 2 raised to (L - 1) is added
                   to the sum.  For example, a node which performs only
                   routing functions would have a value of 4 (2^(3-1)).
                   In contrast, a node which is a host offering application
                   services would have a value of 72 (2^(4-1) + 2^(7-1)).
                   Note that in the context of the Internet suite of
                   protocols, values should be calculated accordingly:

                        layer      functionality
                          1        physical (e.g., repeaters)
                          2        datalink/subnetwork (e.g., bridges)
                          3        internet (e.g., supports the IP)
                          4        end-to-end  (e.g., supports the TCP)
                          7        applications (e.g., supports the SMTP)

                   For systems including OSI protocols, layers 5 and 6
                   may also be counted."
           ::= { system 7 }

       -- object resource information
       --
       -- a collection of objects which describe the SNMP entity's
       -- (statically and dynamically configurable) support of
       -- various MIB modules.

       sysORLastChange OBJECT-TYPE
           SYNTAX     TimeStamp
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The value of sysUpTime at the time of the most recent
                   change in state or value of any instance of sysORID."
           ::= { system 8 }

       sysORTable OBJECT-TYPE
           SYNTAX     SEQUENCE OF SysOREntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
                   "The (conceptual) table listing the capabilities of
                   the local SNMP application acting as a command
                   responder with respect to various MIB modules.
                   SNMP entities having dynamically-configurable support
                   of MIB modules will have a dynamically-varying number
                   of conceptual rows."
           ::= { system 9 }

       sysOREntry OBJECT-TYPE
           SYNTAX     SysOREntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
                   "An entry (conceptual row) in the sysORTable."
           INDEX      { sysORIndex }
           ::= { sysORTable 1 }

       SysOREntry ::= SEQUENCE {
           sysORIndex     INTEGER,
           sysORID        OBJECT IDENTIFIER,
           sysORDescr     DisplayString,
           sysORUpTime    TimeStamp
       }

       sysORIndex OBJECT-TYPE
           SYNTAX     INTEGER (1..2147483647)
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
                   "The auxiliary variable used for identifying instances
                   of the columnar objects in the sysORTable."
           ::= { sysOREntry 1 }

       sysORID OBJECT-TYPE
           SYNTAX     OBJECT IDENTIFIER
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "An authoritative identification of a capabilities
                   statement with respect to various MIB modules supported
                   by the local SNMP application acting as a command
                   responder."
           ::= { sysOREntry 2 }

       sysORDescr OBJECT-TYPE
           SYNTAX     DisplayString
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "A textual description of the capabilities identified
                   by the corresponding instance of sysORID."
           ::= { sysOREntry 3 }

       sysORUpTime OBJECT-TYPE
           SYNTAX     TimeStamp
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The value of sysUpTime at the time this conceptual
                   row was last instantiated."
           ::= { sysOREntry 4 }

       -- the SNMP group
       --
       -- a collection of objects providing basic instrumentation and
       -- control of an SNMP entity.

       snmp     OBJECT IDENTIFIER ::= { mib-2 11 }

       snmpInPkts OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The total number of messages delivered to the SNMP
                   entity from the transport service."
           ::= { snmp 1 }

       snmpInBadVersions OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The total number of SNMP messages which were delivered
                   to the SNMP entity and were for an unsupported SNMP
                   version."
           ::= { snmp 3 }

       snmpInBadCommunityNames OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                  "The total number of community-based SNMP messages (for
                  example,  SNMPv1) delivered to the SNMP entity which
                  used an SNMP community name not known to said entity.
                  Also, implementations which authenticate community-based
                  SNMP messages using check(s) in addition to matching
                  the community name (for example, by also checking
                  whether the message originated from a transport address
                  allowed to use a specified community name) MAY include
                  in this value the number of messages which failed the
                  additional check(s).  It is strongly RECOMMENDED that

                  the documentation for any security model which is used
                  to authenticate community-based SNMP messages specify
                  the precise conditions that contribute to this value."
           ::= { snmp 4 }

       snmpInBadCommunityUses OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                  "The total number of community-based SNMP messages (for
                  example, SNMPv1) delivered to the SNMP entity which
                  represented an SNMP operation that was not allowed for
                  the SNMP community named in the message.  The precise
                  conditions under which this counter is incremented
                  (if at all) depend on how the SNMP entity implements
                  its access control mechanism and how its applications
                  interact with that access control mechanism.  It is
                  strongly RECOMMENDED that the documentation for any
                  access control mechanism which is used to control access
                  to and visibility of MIB instrumentation specify the
                  precise conditions that contribute to this value."
           ::= { snmp 5 }

       snmpInASNParseErrs OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The total number of ASN.1 or BER errors encountered by
                   the SNMP entity when decoding received SNMP messages."
           ::= { snmp 6 }

       snmpEnableAuthenTraps OBJECT-TYPE
           SYNTAX      INTEGER { enabled(1), disabled(2) }
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
                   "Indicates whether the SNMP entity is permitted to
                   generate authenticationFailure traps.  The value of this
                   object overrides any configuration information; as such,
                   it provides a means whereby all authenticationFailure
                   traps may be disabled.

                   Note that it is strongly recommended that this object
                   be stored in non-volatile memory so that it remains
                   constant across re-initializations of the network
                   management system."
           ::= { snmp 30 }

       snmpSilentDrops OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                  "The total number of Confirmed Class PDUs (such as
                  GetRequest-PDUs, GetNextRequest-PDUs,
                  GetBulkRequest-PDUs, SetRequest-PDUs, and
                  InformRequest-PDUs) delivered to the SNMP entity which
                  were silently dropped because the size of a reply
                  containing an alternate Response Class PDU (such as a
                  Response-PDU) with an empty variable-bindings field
                  was greater than either a local constraint or the
                  maximum message size associated with the originator of
                  the request."
           ::= { snmp 31 }

       snmpProxyDrops OBJECT-TYPE
           SYNTAX     Counter32
           MAX-ACCESS read-only
           STATUS     current
           DESCRIPTION
                   "The total number of Confirmed Class PDUs
                   (such as GetRequest-PDUs, GetNextRequest-PDUs,
                   GetBulkRequest-PDUs, SetRequest-PDUs, and
                   InformRequest-PDUs) delivered to the SNMP entity which
                   were silently dropped because the transmission of
                   the (possibly translated) message to a proxy target
                   failed in a manner (other than a time-out) such that
                   no Response Class PDU (such as a Response-PDU) could
                   be returned."
           ::= { snmp 32 }

       -- information for notifications
       --
       -- a collection of objects which allow the SNMP entity, when
       -- supporting a notification originator application,
       -- to be configured to generate SNMPv2-Trap-PDUs.

       snmpTrap       OBJECT IDENTIFIER ::= { snmpMIBObjects 4 }

       snmpTrapOID OBJECT-TYPE
           SYNTAX     OBJECT IDENTIFIER
           MAX-ACCESS accessible-for-notify
           STATUS     current
           DESCRIPTION
                   "The authoritative identification of the notification
                   currently being sent.  This variable occurs as
                   the second varbind in every SNMPv2-Trap-PDU and
                   InformRequest-PDU."
           ::= { snmpTrap 1 }

       --  ::= { snmpTrap 2 }   this OID is obsolete

       snmpTrapEnterprise OBJECT-TYPE
           SYNTAX     OBJECT IDENTIFIER
           MAX-ACCESS accessible-for-notify
           STATUS     current
           DESCRIPTION
                   "The authoritative identification of the enterprise
                   associated with the trap currently being sent.  When an
                   SNMP proxy agent is mapping an RFC1157 Trap-PDU
                   into a SNMPv2-Trap-PDU, this variable occurs as the
                   last varbind."
           ::= { snmpTrap 3 }

       --  ::= { snmpTrap 4 }   this OID is obsolete

       -- well-known traps

       snmpTraps      OBJECT IDENTIFIER ::= { snmpMIBObjects 5 }

       coldStart NOTIFICATION-TYPE
           STATUS  current
           DESCRIPTION
                   "A coldStart trap signifies that the SNMP entity,
                   supporting a notification originator application, is
                   reinitializing itself and that its configuration may
                   have been altered."
           ::= { snmpTraps 1 }

       warmStart NOTIFICATION-TYPE
           STATUS  current
           DESCRIPTION
                   "A warmStart trap signifies that the SNMP entity,
                   supporting a notification originator application,
                   is reinitializing itself such that its configuration
                   is unaltered."
           ::= { snmpTraps 2 }

       -- Note the linkDown NOTIFICATION-TYPE ::= { snmpTraps 3 }
       -- and the linkUp NOTIFICATION-TYPE ::= { snmpTraps 4 }
       -- are defined in RFC 2863 [RFC2863]

       authenticationFailure NOTIFICATION-TYPE
           STATUS  current
           DESCRIPTION
                   "An authenticationFailure trap signifies that the SNMP
                    entity has received a protocol message that is not
                    properly authenticated.  While all implementations
                    of SNMP entities MAY be capable of generating this
                    trap, the snmpEnableAuthenTraps object indicates
                    whether this trap will be generated."
           ::= { snmpTraps 5 }

       -- Note the egpNeighborLoss notification is defined
       -- as { snmpTraps 6 } in RFC 1213

       -- the set group
       --
       -- a collection of objects which allow several cooperating
       -- command generator applications to coordinate their use of the
       -- set operation.

       snmpSet        OBJECT IDENTIFIER ::= { snmpMIBObjects 6 }

       snmpSetSerialNo OBJECT-TYPE
           SYNTAX     TestAndIncr
           MAX-ACCESS read-write
           STATUS     current
           DESCRIPTION
                   "An advisory lock used to allow several cooperating
                   command generator applications to coordinate their
                   use of the SNMP set operation.

                   This object is used for coarse-grain coordination.
                   To achieve fine-grain coordination, one or more similar
                   objects might be defined within each MIB group, as
                   appropriate."
           ::= { snmpSet 1 }

       -- conformance information

       snmpMIBConformance
                      OBJECT IDENTIFIER ::= { snmpMIB 2 }

       snmpMIBCompliances
                      OBJECT IDENTIFIER ::= { snmpMIBConformance 1 }
       snmpMIBGroups  OBJECT IDENTIFIER ::= { snmpMIBConformance 2 }

       -- compliance statements

       --    ::= { snmpMIBCompliances 1 }      this OID is obsolete
       snmpBasicCompliance MODULE-COMPLIANCE
           STATUS  deprecated
           DESCRIPTION
                   "The compliance statement for SNMPv2 entities which
                   implement the SNMPv2 MIB.

                   This compliance statement is replaced by
                   snmpBasicComplianceRev2."
           MODULE  -- this module
               MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup,
                                  snmpBasicNotificationsGroup }

               GROUP   snmpCommunityGroup
               DESCRIPTION
                   "This group is mandatory for SNMPv2 entities which
                   support community-based authentication."
           ::= { snmpMIBCompliances 2 }

       snmpBasicComplianceRev2 MODULE-COMPLIANCE
           STATUS  current
           DESCRIPTION
                   "The compliance statement for SNMP entities which
                   implement this MIB module."
           MODULE  -- this module
               MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup,
                                  snmpBasicNotificationsGroup }

               GROUP   snmpCommunityGroup
               DESCRIPTION
                   "This group is mandatory for SNMP entities which
                   support community-based authentication."

               GROUP   snmpWarmStartNotificationGroup
               DESCRIPTION
                   "This group is mandatory for an SNMP entity which
                   supports command responder applications, and is
                   able to reinitialize itself such that its
                   configuration is unaltered."
           ::= { snmpMIBCompliances 3 }

       -- units of conformance

       --  ::= { snmpMIBGroups 1 }           this OID is obsolete
       --  ::= { snmpMIBGroups 2 }           this OID is obsolete
       --  ::= { snmpMIBGroups 3 }           this OID is obsolete

       --  ::= { snmpMIBGroups 4 }           this OID is obsolete

       snmpGroup OBJECT-GROUP
           OBJECTS { snmpInPkts,
                     snmpInBadVersions,
                     snmpInASNParseErrs,
                     snmpSilentDrops,
                     snmpProxyDrops,
                     snmpEnableAuthenTraps }
           STATUS  current
           DESCRIPTION
                   "A collection of objects providing basic instrumentation
                   and control of an SNMP entity."
           ::= { snmpMIBGroups 8 }

       snmpCommunityGroup OBJECT-GROUP
           OBJECTS { snmpInBadCommunityNames,
                     snmpInBadCommunityUses }
           STATUS  current
           DESCRIPTION
                   "A collection of objects providing basic instrumentation
                   of a SNMP entity which supports community-based
                   authentication."
           ::= { snmpMIBGroups 9 }

       snmpSetGroup OBJECT-GROUP
           OBJECTS { snmpSetSerialNo }
           STATUS  current
           DESCRIPTION
                   "A collection of objects which allow several cooperating
                   command generator applications to coordinate their
                   use of the set operation."
           ::= { snmpMIBGroups 5 }

       systemGroup OBJECT-GROUP
           OBJECTS { sysDescr, sysObjectID, sysUpTime,
                     sysContact, sysName, sysLocation,
                     sysServices,
                     sysORLastChange, sysORID,
                     sysORUpTime, sysORDescr }
           STATUS  current
           DESCRIPTION
                   "The system group defines objects which are common to all
                   managed systems."
           ::= { snmpMIBGroups 6 }

       snmpBasicNotificationsGroup NOTIFICATION-GROUP
           NOTIFICATIONS { coldStart, authenticationFailure }
           STATUS        current
           DESCRIPTION
              "The basic notifications implemented by an SNMP entity
               supporting command responder applications."
           ::= { snmpMIBGroups 7 }

       snmpWarmStartNotificationGroup NOTIFICATION-GROUP
          NOTIFICATIONS { warmStart }
          STATUS        current
          DESCRIPTION
            "An additional notification for an SNMP entity supporting
            command responder applications, if it is able to reinitialize
            itself such that its configuration is unaltered."
         ::= { snmpMIBGroups 11 }

       snmpNotificationGroup OBJECT-GROUP
           OBJECTS { snmpTrapOID, snmpTrapEnterprise }
           STATUS  current
           DESCRIPTION
                   "These objects are required for entities
                   which support notification originator applications."
           ::= { snmpMIBGroups 12 }

       -- definitions in RFC 1213 made obsolete by the inclusion of a
       -- subset of the snmp group in this MIB

       snmpOutPkts OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP Messages which were
                   passed from the SNMP protocol entity to the
                   transport service."
           ::= { snmp 2 }

       -- { snmp 7 } is not used

       snmpInTooBigs OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP PDUs which were
                   delivered to the SNMP protocol entity and for
                   which the value of the error-status field was
                   `tooBig'."
           ::= { snmp 8 }

       snmpInNoSuchNames OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP PDUs which were
                   delivered to the SNMP protocol entity and for
                   which the value of the error-status field was
                   `noSuchName'."
           ::= { snmp 9 }

       snmpInBadValues OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP PDUs which were
                   delivered to the SNMP protocol entity and for
                   which the value of the error-status field was
                   `badValue'."
           ::= { snmp 10 }

       snmpInReadOnlys OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number valid SNMP PDUs which were delivered
                   to the SNMP protocol entity and for which the value
                   of the error-status field was `readOnly'.  It should
                   be noted that it is a protocol error to generate an
                   SNMP PDU which contains the value `readOnly' in the
                   error-status field, as such this object is provided
                   as a means of detecting incorrect implementations of
                   the SNMP."
           ::= { snmp 11 }

       snmpInGenErrs OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP PDUs which were delivered
                   to the SNMP protocol entity and for which the value
                   of the error-status field was `genErr'."
           ::= { snmp 12 }

       snmpInTotalReqVars OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of MIB objects which have been
                   retrieved successfully by the SNMP protocol entity
                   as the result of receiving valid SNMP Get-Request
                   and Get-Next PDUs."
           ::= { snmp 13 }

       snmpInTotalSetVars OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of MIB objects which have been
                   altered successfully by the SNMP protocol entity as
                   the result of receiving valid SNMP Set-Request PDUs."
           ::= { snmp 14 }

       snmpInGetRequests OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP Get-Request PDUs which
                   have been accepted and processed by the SNMP
                   protocol entity."
           ::= { snmp 15 }

       snmpInGetNexts OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP Get-Next PDUs which have been
                   accepted and processed by the SNMP protocol entity."
           ::= { snmp 16 }

       snmpInSetRequests OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP Set-Request PDUs which
                   have been accepted and processed by the SNMP protocol
                   entity."
           ::= { snmp 17 }

       snmpInGetResponses OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP Get-Response PDUs which
                   have been accepted and processed by the SNMP protocol
                   entity."
           ::= { snmp 18 }

       snmpInTraps OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP Trap PDUs which have been
                   accepted and processed by the SNMP protocol entity."
           ::= { snmp 19 }

       snmpOutTooBigs OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP PDUs which were generated
                   by the SNMP protocol entity and for which the value
                   of the error-status field was `tooBig.'"
           ::= { snmp 20 }

       snmpOutNoSuchNames OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP PDUs which were generated
                   by the SNMP protocol entity and for which the value
                   of the error-status was `noSuchName'."
           ::= { snmp 21 }

       snmpOutBadValues OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP PDUs which were generated
                   by the SNMP protocol entity and for which the value
                   of the error-status field was `badValue'."
           ::= { snmp 22 }

       -- { snmp 23 } is not used

       snmpOutGenErrs OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP PDUs which were generated
                   by the SNMP protocol entity and for which the value
                   of the error-status field was `genErr'."
           ::= { snmp 24 }

       snmpOutGetRequests OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP Get-Request PDUs which
                   have been generated by the SNMP protocol entity."
           ::= { snmp 25 }

       snmpOutGetNexts OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP Get-Next PDUs which have
                   been generated by the SNMP protocol entity."
           ::= { snmp 26 }

       snmpOutSetRequests OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP Set-Request PDUs which
                   have been generated by the SNMP protocol entity."
           ::= { snmp 27 }

       snmpOutGetResponses OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP Get-Response PDUs which
                   have been generated by the SNMP protocol entity."
           ::= { snmp 28 }

       snmpOutTraps OBJECT-TYPE
           SYNTAX      Counter32
           MAX-ACCESS  read-only
           STATUS      obsolete
           DESCRIPTION
                   "The total number of SNMP Trap PDUs which have
                   been generated by the SNMP protocol entity."
           ::= { snmp 29 }

       snmpObsoleteGroup OBJECT-GROUP
           OBJECTS { snmpOutPkts, snmpInTooBigs, snmpInNoSuchNames,
                     snmpInBadValues, snmpInReadOnlys, snmpInGenErrs,
                     snmpInTotalReqVars, snmpInTotalSetVars,
                     snmpInGetRequests, snmpInGetNexts, snmpInSetRequests,
                     snmpInGetResponses, snmpInTraps, snmpOutTooBigs,
                     snmpOutNoSuchNames, snmpOutBadValues,
                     snmpOutGenErrs, snmpOutGetRequests, snmpOutGetNexts,
                     snmpOutSetRequests, snmpOutGetResponses, snmpOutTraps
                     }
           STATUS  obsolete
           DESCRIPTION
                   "A collection of objects from RFC 1213 made obsolete
                   by this MIB module."
           ::= { snmpMIBGroups 10 }

       END

Erlang/OTP                           SNMP                        SNMPv2-MIB(7)

Man(1) output converted with man2html
list of all man pages